Beds for children from 2 years old, varieties, materials, design

Bedroom furniture for babies should be distinguished by safety, environmental friendliness, beautiful appearance. To take into account all these points and choose the best option for their child, parents first need to figure out what are the beds for children from 2 years old, whether they have differences in comparison with more "adult" models. For the equipment of a berth, classic cribs or sofas, adapted for babies, are offered. When choosing take into account the age and gender of the child, hobbies crumbs. Not the last role is played by the size of the room where the furniture will be installed, the budget laid down in the purchase.

Product Features

The skeleton of a two-year-old child is at the initial stage of development. The position in which the baby sleeps depends on how its bones and spine are formed. In addition, babies often toss and turn in their sleep, so you need to protect them from accidental falls. The crib should be comfortable for the back, have protective sides, provide air access.

Choosing the next bed for the baby after the arena, pay attention to such details:

the edges;
sides;
headboard;
backrest;
height.

The edges of the crib for children from 2 years old are rounded, which eliminates the likelihood of injury. The protruding parts should be small in size, they are made so that the child does not cling to during sleep and active games. Also, they should not impede the access of parents to a sleeping baby.

Depending on the intended installation location, a bed is chosen for children from 2 years old with bumpers located on one or two sides. If the berth is near the wall, a single-breasted version is enough. If the parents plan to create access to the child from two sides, they choose double-breasted models.

The presence and height of the sides is determined based on the level of development of the child and his skills.

For a crib for a baby of two years, a side height of 1/3 of the length of the product is enough. The fence can cover the side part in full or in part - at the head. The second option is preferable. Particular attention is paid to the strength of parts. Kids can climb on the sides during games, so the mount must be reliable and withstand the load created by body weight. In some models for two-year-old children, the sides are installed at the head. With this arrangement, the pillow does not move and does not fall.

The back of the crib is hard and soft. The second option is preferable for babies. The soft material creates additional warmth and comfort in the cold season, and the likelihood of injuries during sleep is also eliminated. The disadvantage is the ability to accumulate dust. The rigid version can be solid when the back is made of a single piece of material, or lattice. The integral back closes the head from the movement of air and protects from drafts. This option is convenient for the northern regions. Lattice - provides oxygen access and creates comfortable conditions for sleep.

The sizes of children's beds correspond to the established standards. For Russia, the dimensions of products for a baby from 2 years old are 140 x 70 cm. The height of the bottom from the floor should not be more than 1 m.

In some cases, the lower level is reserved for the table or playing space. If the family has two children, it is advisable to install a bed with two berths, located one above the other. For such furniture, the safety of a child located on the upper tier is of particular importance, therefore it is equipped with bumpers and ladders. Usually the lower floor is occupied by the youngest child, and the upper - the eldest.

Varieties

The most practical option for children from 2 years old is beds with additional functions. Various models are presented on the market:

transformers;
cots with a chest of drawers;
sofa beds;
two-tier options.

A transforming bed is comfortable in that its parameters change. As the child grows, special devices adjust the size of the model - length and height. During the wake of the crumbs, the furniture is folded, he can play on it, as on a special platform.

One of the most popular options is the "Kid" model. It provides for the design of an attic bed and is characterized by a wide variety of options. The berth is usually located on the upper tier. At the lower level there is a table, drawers for storing things, a ladder for climbing up. Steps can also be made in the form of a chest of drawers with drawers. The table is stationary or extendable.

Such a complex can significantly save space and is multifunctional. The location of the stairs, tables, the number of drawers may vary.

For two-year-old children, they usually choose a model where the berth is located at a height of no more than 1 m from the floor, and is also equipped with protective sides. Below is a zone for gaming activities. Such furniture can be used until the child reaches the age of 5 years.

Comfortable for sleeping and a sofa bed for children. Such models are soft, comfortable. Partial bumpers are installed on furniture for safety during sleep. The design is suitable for older children. This option of parents attracts with practicality, compact dimensions, and children with its bright, cartoonish coloring. Folding sofas are cheaper than cots, look harmoniously in the child’s room. However, not every model meets the standards necessary for the health of the children's spine.

Manufacturers also offer a wide range of cartoon-style furniture. It can be cars, a trip, princesses, all kinds of animals - children are usually delighted with such beds.

Bunk

Sofa bed

Transformer

"Kid"

Types of sides and base

The most important details of the bed are the sides and bottom. The correct position of the body during sleep and safety depend on their type and quality. Sides vary in design and size. Barrier beds are available on the market:

motionless;
removable;
moving up and down.

Manufacturers make baby cots from 2 years old with two types of sides: with removable or integrated elements. The latter are fixed on the base and do not move. The advantage of this type is a strong mount that supports the weight of the baby. If the baby wakes up and tries to get out on his own, he will not break the structure.

On wooden products or models made of MDF, chipboard, solid sides are fixed with metal fasteners or special glue. To create built-in barriers use slats, rods, thin bars. Some models are distinguished by carved or curly side parts. If the furniture is plastic, the parts are cast, they are one piece with the body.

The fence can be solid or partial. In the first case, it is installed along the entire length of the lateral region of the crib. Partial - cover only the headboard. The length of such a side can be different. Typically, the fence is half or 1/3 of the length. This option is recommended for independent babies. Often, soft inserts of elastic fabric, mesh or foam rolls are installed in the sides. They protect the baby and do not allow injuries during sleep.

The base of the crib must be rigid in order to create an orthopedic effect. The continuous design makes it difficult for air to reach the mattress. It is better if it consists of lamellas. Separate fragments, installed at a short distance from each other, provide ventilation of the bed. In models-transformers, they are adjustable in width and length, which is very practical and also cost-effective.

Materials of manufacture

The best material for a baby crib of 2 years is considered a tree. This environmentally friendly raw material that does not cause irritation and allergies. The highest quality products from hardwoods - oak, beech, ash. Such materials well tolerate processing - grinding, polishing. They do not appear chips, cracks, scratches, which protects the child from splintering.

Laminated plywood is popular for creating children's furniture. It is strong, light, reliable. Surface treatment with a special protective coating provides resistance to moisture, pests, strengthens the material. From such raw materials make side parts, lamellas for the base.

Often, MDF and chipboard are used in production. The material is used in the product 100% or in combination with natural wood. Cots made from such raw materials have less weight. Products for children from safe materials are designated by the symbols E0 or E1. The use of raw materials of a class greater than E1 is not allowed.

If the product is marked E2, then it is assembled from materials hazardous to the child.

Recently, in the production of cots, plastic is increasingly used. The model may consist entirely of this material or have separate elements in combination with other raw materials.

Plastic

Chipboard

MDF

Wood

Design

The external design of the beds for children is striking in its diversity. They will become a decoration of a children's room, successfully fit into the chosen style. The most popular design options:

Fairy tale. Suitable for children keen on stories about princesses, knights, dragons.
Auto topic. Bright and original cars will appeal to kids who are fond of cartoons about cars.
Flora. Floral and floral motifs relieve nervous tension, allow you to calm down.
Houses. They create coziness and comfort.
Transport. Cots for children with sides, stylized as airplanes, trains, carriages, like kids who are fond of travel.

Classic models have not ceased to be popular. Children's bed options are decorated according to age and gender. For girls, rhinestones are installed on the frame, the bed is painted in bright or pastel colors in delicate shades. Boys are offered colder color options. The bed can be plain or combine 2 colors. White-blue, white-pink variations are the most popular.

How to choose

To ensure that the sleeping place for the baby is safe and functional, certain nuances must be taken into account in the selection process:

There should be no sharp corners in the design. All edges must be soft, streamlined.
The product must be stable, not sway. Kids love to jump in bed, so you should exclude the possibility of tipping over.
It is better to give preference to a base of lamellas.
The product must be equipped with protective sides. In trellised varieties, the distance between the individual fragments should be sufficient for the baby's arm or leg. It is important that the gaps are smaller than the heads of the crumbs.
Transformers are more profitable than ordinary models. They are folded, which saves space, are regulated depending on the growth of the baby. This bed has been used for many years.
Equipment. It is good if a mattress and pillow are sold with a bed. They correspond to the size of the base, and in this case there is no need to search for sleeping accessories.
The presence of drawers will allow you to place in them children's things, use space economically.
Chips, cracks on the product can cause injury to the baby.
Boxes should move easily, smoothly, without creaking and jerking.
A certificate of quality and safety is required.
An important issue is environmental friendliness - natural wood is preferable to synthetic materials.
The filler in the sofa bed must be protected from dust mites.

In the stores there are many models designed for different tastes and financial situation of the family. Preference should be given to options that are not only pleasant to the child, but also are high-quality, safe. Children's beds from 2 years old must strictly comply with all operational characteristics and GOST standards.